Lonsdor K518 Update Mazda EZ-6 EZ-60 2024-2026 IMMO

Lonsdor K518 Pro and K518ISE series released new Mazda, Nio and XiaoPeng immobilizer software on May 13th, 2026.

 

Mazda first release:

Supports pin code reading/All keys lost programming for
EZ-6 2024-2026 Smart key system
EZ-60 2025-2026 Smart key system

NIO & XPeng

Model	Year	System
NIO\ES6 (PinCode FREE)	2018-2022	Smart key
NIO\EC6 (PinCode FREE)	2019-2022	Smart key
NIO\ES8 (PinCode FREE)	2018-2022	Smart key
XPeng\P7 (PinCode FREE)	2020-2023	Smart key
XPeng\P5 (PinCode FREE)	2021-2024	Smart key
XPeng\P7i (PinCode FREE)	2023-2024	Smart key
XPeng\G6 (PinCode FREE)	2023-2024	Smart key
XPeng\G9 (PinCode FREE)	2021-2024	Smart key

Lonsdor K518 VW MQB 5C Blade Key Data Reading Failed Solution

Problem:

Trying to make a key for a 2019 VW Polo, Normal key not proximity. 5c chip. Tried using both adapters that are in the shape of the key. Lonsdor K518 failed to read original key data with the MQB49 5C adapter.

It reported an error “Data reading failed. Error code Unlock failed ret=25”. Any solution?

Solution:

Check the connection diagram carefully. You need to solder one wire from the key circuit board to the 5C interface board, as shown in the diagram. Then try again, and it should work.

Not for all key types. For this type of key, solder 1 wire to the board.

If reading the original key data for BMW BDC2 or BDC3 fails (error code 25), check if need to solder 1 wire to the board as well.

Lonsdor K518 Adds ChangAn 2024-2026 Smart Key Programming

Lonsdor K518 Pro and K518ISE series released new update- adding ChangAn smart key programming models:

CHANGAN New Update

– Support AKL Programming via PIN Code Reading

X7 PLUS (2024-2026) Smart key
Qiyuan A06 (2025-2026) Smart key
Eado(gen4) (2025-2026) Smart key
CS75 (2021-2024) Smart key
CS95 PLUS (2023-2026) Smart key
S202 (2020-2026) Smart key
UNI-Z (2020-2026) Smart key
Kaicene V919 (2025-2026) Smart key
OSHAN X5 PLUS (2022-2024) Smart key
New Eado PLUS (2025-2026) Smart key

Support Remote Programming via PIN Code Reading

– Ruixing M60 (2023-2025) BCM
– Ruixing EM60 II (2023-2025) BCM
– Ruixing EM80 (2022-2026) BCM
– Ruixing EM80 II (2023-2026) BCM