Lonsdor K518ISE Program Citroen Berlingo 2013 Remote Key

How-to guide: Citroen Berlingo 2013 key programming by Keydiy remote using Lonsdor K518ISE key programmer via OBD.

Berlingo 2013 original remote 3-button

Keydiy universal remote 3-button

Step 1: Read Pin Code 

Connect K518 host with vehicle via OBD socket

Select Immobilizer->Citroen-> Read pin code->Type 2

Turn ignition switch to ON position with original key

Read vehicle information: VIN, PSA number etc

Reading data and verifying PIN

Londsdor K518 read Berlingo 2013 pin code succeed

Step 2: Program key & remote 

Select Immobilizer->Citroen->Select from vehicle ->Berlingo->Immobilizer->Type 3->Program key

Turn ignition to ON position

Communicating

Read vehicle information again

K518ISE requires 4-digit pin code to access

Turn ignition OFF and ON with original key within 15 seconds

1st key programming completed

Turn ignition off.

Insert new key (keydiy remote), turn ignition on

2nd key programming completed

Follow steps below to program remote control:

1. Turn ignition off and remove key
2. Insert a key and switch ignition on
3. Press any button of the remote key for 10 sec and then release within 20 sec
4. Switch ignition off and remove key

Program remote key success.

Test the remote and start vehicle.

Done.

www.obdii365.com

Lonsdor K518ISE Program 2014 Chevrolet Impala Keyless Remote

2014 Chevrolet Impala keyless entry remote programming by Keydiy NC series remote using Lonsdot K518ISE key programmer.

including pin code reading.

Step 1: Generate remote using Keydiy KD-X2

Put original key into KD-X2 remote maker, identify chip: 46 chip

Remote Programming->Chevrolet->select remote 2011-2014 Cruze 433MHz multifunction

Click on Generate Remote

Generate remote success

Step 2: Read Pin code with Lonsdor K518ISE

Connect K518 host with vehicle via OBD socket

Select Chevrolet->Read Pin Code->Read pin code type5

Turn on ignition switch

Identify VIN

Read pin code success

Step 3: Program key with Lonsdor K518

Select Chevrolet->enter from Cruze->Immobilizer->All keys lost

Close all doors and switch ignition on

Enter 4-digit pin code to access

Configuring system, wait about 10 minutes

Follow K518ISE prompts step by step and wait patiently
The progress is just like the Cruze

Succeed.

Test the remote.

Done.

www.obdii365.com

http://www.lonsdor.org/lonsdor-k518ise-program-2014-chevrolet-impala-keyless-entry-remote/

Lonsdor K518ISE Program Toyota RAV4 4D Chip All Keys Lost

New test report: Program Toyota RAV4 year 2009 Middle East model with 4D chip when all keys lost by Lonsdor K518ISE key programmer via OBD successfully.

Connect K518 host with vehicle via OBD socket

Turn ignition on

Select Immobilizer->Toyota->Select from type->G all key lost->4D-G-H-8A->Reset Immobilizer (4D All keys lost)

Turn ignition off

Turn ignition on

Configuring system

Turn ignition off and remove key

Turn ignition on

Lonsdor K518 Program key in progress

Turn ignition off and remove key

Follow steps below to program key within 120 seconds

1. Program 2 master keys and 1 valet key
2. Insert the first master key, turn ignition on and wait for 5 seconds
3. Insert the second master key, turn ignition on and wait for 5 seconds
4. Insert the third valet key, turn ignition on and wait for 5 seconds

Wait until program complete.

Test the new keys.

www.obdii365.com

http://www.lonsdor.org/lonsdor-k518ise-program-toyota-rav4-g-chip-all-keys-lost/

Lonsdor K518ISE Read Buick Lacrosse 2011 Pin Code by OBD

New test feedback: Lonsdor K518ISE key programmer read security pin code on Buick Lacrosse 2011 success.

Very fast.

Connect K518 host with vehicle via OBD socket

Select Buick->Read PIN Code->Type 6

http://www.obdii365.com/wholesale/lonsdor-k518ise-key-programmer.html

Lonsdor K518ISE Program Chevrolet Cruze 2016 All Keys Lost

How to: read Chevrolet Cruze year 2016 security pin code and program remote keys when all keys lost using Lonsdor K518ISE key programmer.

Step 1: Read Pin Code

Connect K518 Host with vehicle via OBD diagnostic socket

Select Immobilizer->Chevrolet -> Read Pin Code->Read Pin Code Type 1

Turn on ignition switch

Communicating…

Lonsdor K518ISE read pin code success.

Step 2: Program Remote Key

Go back to Chevrolet menu

Select Cruze-> Immobilizer-> All Keys Lost

Close all doors and turn on ignition

Lonsdor K518 will require enter 4-digit pin code to access and confirm

Configuring system, wait for 10 minutes.

Turn ignition off. Remove key

Switch on and off the driver door, make sure all the electrical appliances are off.

Click OK to continue.

Insert key to be programmed and turn on ignition switch

Program success. Press YES to program next key.

Follow steps above to program next key or more keys.

Turn ignition off. Remove key.

Program complete.

Start car and test the remote.

Working!!!

http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.lonsdor.org/lonsdor-k518ise-program-chevrolet-cruze-2016-all-keys-lost/