Thursday, February 21, 2019

Lonsdor K518ISE Program BMW F01 2010 CAS4 Remote Key

Model: BMW 7-series F01 2010
IMMO Type: CAS4 1L15Y
Remote frequency: 868MHz
Tools used: 1 original key and a new key, remote unlocker, xhorse vvdi prog and Lonsdor k518ISE key programmer
lonsdor-k518-bmw-2010-f01-1

lonsdor-k518-bmw-2010-f01-2

lonsdor-k518-bmw-2010-f01-3
Step 1: Renew Remote Key
unlock/renew BMW remote key PCF7953 using vvdi key tool or other remote unlocker
lonsdor-k518-bmw-2010-f01-4

lonsdor-k518-bmw-2010-f01-5

lonsdor-k518-bmw-2010-f01-6

lonsdor-k518-bmw-2010-f01-7
Step 2: Read CAS4 Dump with VVDI Prog
lonsdor-k518-bmw-2010-f01-8
Follow VVDI-Prog wiring diagram to connect cas4 and computer
lonsdor-k518-bmw-2010-f01-9

lonsdor-k518-bmw-2010-f01-10
Read and save CAS4 1L15Y dump data
lonsdor-k518-bmw-2010-f01-11
Step 3: Add key with Lonsdor K518
Select Immobilizer->BMW->Select from type->CAS4/CAS4+ ->Make ignition key
lonsdor-k518-bmw-2010-f01-12
Copy and paste CAS4 D-flash/EEPROM to Lonsdor “customfile” folder
lonsdor-k518-bmw-2010-f01-13
Select D-flash data
lonsdor-k518-bmw-2010-f01-14
Read VIN
lonsdor-k518-bmw-2010-f01-15
Select a key position to add
lonsdor-k518-bmw-2010-f01-16
Put the key to be generated to K518 card slot
lonsdor-k518-bmw-2010-f01-17
Generate ignition key success.
Follow steps below to program remote control:
lonsdor-k518-bmw-2010-f01-18

lonsdor-k518-bmw-2010-f01-19
Program remote key success.
Reinstall CAS4 module
Close the new key to ignition and press Start button to sync key
Test remote control and start engine.
lonsdor-k518-bmw-2010-f01-20

lonsdor-k518-bmw-2010-f01-21

lonsdor-k518-bmw-2010-f01-22

lonsdor-k518-bmw-2010-f01-23

lonsdor-k518-bmw-2010-f01-24
Done.

http://www.lonsdor.org/lonsdor-k518ise-adds-bmw-7-series-f01-2010-cas4-remote-key/

No comments:

Post a Comment