Sunday, March 29, 2020

Lonsdor KH100 Keeps loading when turn on Solution

Here are the solutions to some common problems of Lonsdor KH100 remote maker.

Problem 1:Cannot connect to network even if there are several hotspots available.
Problem 2: Stuck in some interface for a long time while operating.
For example, when you register the device, it just keeps searching for network. When you turn on the device, it keeps loading for several minutes.
Problem 3:  lonsdor kh100 turned on the device and there is an UPDATE SCM 99% screen and it does not respond.
lonsdor-kh100-update-scm
Solution to problem 1, 2 & 3:
Download the repaired file of KH100 and put the file on the desktop of a computer. Unzip the file and you will get two files.
download-lonsdor-kh100-repair-file-1
Turn off the device. Hold “Down” button for a few seconds and then press “Power” button once, the device will enter “USB Disk Mode” interface.
download-lonsdor-kh100-repair-file-2

download-lonsdor-kh100-repair-file-3
Connect the device to the computer and put those two files into the kh100.
Click “OK” to reboot the device and you will see a progress bar in the device. The device will be updated automatically.
download-lonsdor-kh100-repair-file-4
Check whether the lonsdor kh100 works or not after updating.

No comments:

Post a Comment