Lonsdor K518 Read Pin Code for Chrysler Grand Voyager 2010

New test report: Chrysler grand voyager 2010 pin code reading with Lonsdor K518ISE key programmer success.

Connect K518 host with vehicle via OBD socket

Turn on ignition

Select Immobilization->Chrysler->Select from Type->Type 4 (CAN)->Read Pin Code

Confirm to start reading pin code

Lonsdor K518 read pin code grand voyager 2010 success.

http://www.obdii365.com/producttags/lonsdor-k518ise.html

Lonsdor K518ISE Adds Jaguar XF 2014 Smart Key

How to: add a smart key to a Jaguar XF year 2014 with Lonsdor K518ISE key programmer via OBD.

Connect K518 host with vehicle

Turn on ignition

Select Immobilizer->Jaguar->Select from vehicle->XF->2013 up->Smart Key->Add Smart Key

Turn off ignition
Lonsdor K518 read VIN, Part number, software version information: DPLA-14C104-AC

Identify number of keys programmed in car: 4

Program a new smart key

Hold the smart key to be programmed in hand

Programming, press the UNLOCK button on the smart key within 5 sec

Programming…

Unlocking. press the UNLOCK button of the smart key within 5 sec

Follow system prompt to repeat if need to add more smart keys until success.

http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.lonsdor.org/lonsdor-k518ise-program-jaguar-xf-2014-smart-key/

Buy Lonsdor K518 4 Emulator Set Get 1 Free 128 Bit Simulator

Good News!!! Lonsdor Company is rolling out summer promotion now.

Customer who buy Lonsdor K518 and 4 Toyota Smart Key Emulators package will get 1 free orange 128-bit emulator.

Valid: Sep. 18th, 2018 to Sep. 24th, 2018

FREE

Note: If you buy K518 host and 4 smart key simulators separately, you CANNOT get free 128bit simulator key. You need to buy the bundle package.

KE-LT: Smart Key emulator – Toyota/Lexus smart key for all key lost via OBD
Black:  SKE-LT-DST40(94/D4) -Supports 94/D4 smart key.
Red: SKE-LT-8A(88/A8)-Support 88/A8 smart key.
Green: SKE-LT-DST80(98)-Supports 98 smart key.
Blue: SKE-LT-8A(A9)-Supports A9 smart key.

Orange: SKE-LT-39 (128bit) for Toyota 39 chip smart key

http://www.obdii365.com/producttags/lonsdor-k518ise.html

Lonsdor K518ISE Program Kia Sportage 2018 Remote Key

New feedback: Lonsdor K518ISE has successfully programmed keys & remote control to a Kia Sportage year 2018 with key key ID60 (80 bits).

3-button remote key

Procedure:

Step 1: Program chip key

Connect K518 host with vehicle via OBD socket
Select Immobilizer->Kia->Select from Type->Immobilizer->Type 5(K)->Read key number

Insert key and turn on ignition

Identified number of keys stored in car: 1
Select Program Key
Insert key and switch ignition

Lonsdor K518 will ask enter 6-digit Pin code to access
Confirm

Programming complete, program next one

Replace new key and switch on ignition
Programming complete
Press OK to program next key,if not, press Cancel

Remove the key and wait for 5 sec, programming complete.

Both keys can start car.

Step 2: Program remote control:
Select Kia->Select from Type->Remote System->16-pin->Type 1(K)->Program remote

can only program up tp 4 remote controls, press OK to continue

First insert key to turn on ignition, then turn off and remove key

Press LOCK or UNLOCK button for more than 1 sec to program remote control

Repeat to program 2nd remote

Remote control programming complete.

http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.lonsdor.org/lonsdor-k518ise-program-kia-sportage-2018-remote-key/

Lonsdor K518ISE Program Remote Key for Subaru Forester 2016

Here’s the guide to program 3-button remote keys to Subaru Forester 2016 with key chip ID62  (80 bits).  The chip and remote control l programming is performed by the Lonsdor K518ISE key programmer.

Left: new blank key; Right: original key

Procedure:

Connect K518  host with vehicle via OBD socket

Select Immobilizer->Subaru->Select from type->Immobilizer->Type 6(4D 82G chip)

Check key number

Turn on ignition switch

Lonsdor k518 identified 1 key programmed

Select Add key function

Insert original key and turn on ignition switch

Turn off ignition and then turn on

Key has been programmed

Insert new key, turn on ignition and then turn off

Repeat to program more keys if you need

Programming completed

Check number of keys programmed: 3

Select Program remote function

Turn on ignition

Turn ignition off and remove key

Program all remote keys within 5 sec

Press LOCK and UNLOCK button to program remote control

Repeat procedure to program other remotes

Test the remote controls

Success.

http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.lonsdor.org/lonsdor-k518ise-program-subaru-forester-2016-remote-key/