How to Solve Current Key is Not Lonsdor Dedicated JLR Key

 Problem:

Lonsdor special JLR key not being recognized as a lonsdor key, Any solution for this? This is the new version of the JLR key currently being sold.

Solution:

Update Lonsdor K518 machine to latest version.

Remove key shell and then put the key into K518 key slot to read key information again.

If still not working, post a video and send it to www.obdii365.com to analyze.

Can Lonsdor K518 Program 2020 Land Rover Evoque Key?

 Question: Will Lonsdor K518ISE write key to a 2020 Land rover Evoque?

2020 Evoque Low Configuration:

Lonsdor support OBD duplicates a new key. If some models ask for a 32-digit pin, it cannot be duplicated.

Supports all keys lost programming.

 

2020 Evoque High Configuration:

Add key: OBD duplicates a new key will not have keylessgo function, only remote and emergency start. To enable keyless function, you should perform all keys lost procedure.

JPLA version must replace CPU or RFA module, then do AKL under RFA replacement menu. Only in this case, the key will have keyless, remote, keyless entry functions.

If still no keyless function, you have to turn off the UWB function (two keys are required to replace the RFA module if you lose all keys).

To change the vehicle configuration, use the K518. To replace the RFA box or chip, use the 518 to operate first. Replace it, and then use 518 to program the key. (JLR adapter cable is required in the case of active alarms). If the K8D2 version, K518 cannot do it, it needs to be done by JLR official equipment.

 

LONSDOR JLR Jaguar Land rover 2018-2021 Key with Shell 5 Buttons

Lonsdor 2019 Range Rover Keyless Entry Not Working Solution

 After a generate 2019 Range Rover key with Lonsdor K518ISE and JLR smart key, write the key lock unlock works.

But you have to be close to the steering to start which is keyless entry won’t work
And this car has no issues all good he just lost the key.

Solution:

This model UWB ((Ultra Wide Band)) function is enabled. All current Land Rover models employ ‘Ultra Wideband’ (UWB) technology within the vehicle’s Smart Keys. This is normal if keylessgo not working.

Go to Lonsdor Modify vehicle config function.

Disable UWB function.

Then check if the key is working properly.

Lonsdor K518ISE Modify vehicle config Function info.

1. This function is designated for JLR (2018+) high config models, by using it to disable UWB PEPS function, supports low equipped keys to be programmed to the high config models.(1) Backup vehicle config data: back up config data of current vehicle;(2) Modify vehicle config data: disable UWB PEPS function;(3) Restore vehicle config data: restore the config data backed up before to current vehicle.
2. Back up vehicle config data;
3. Communicating…
4. Pls enter the filename;
5. Backup success;
6. Modify vehicle config data;
7. Communicating…
8. Reading data…
9. Disable/turn off UWB PEPS function;
10. Configuring system.
11. Completed.

http://blog.obdii365.com/2021/05/30/lonsdor-518ise-program-2018-range-rover-evoque-all-keys-lost-via-obd/

How to Connect Lonsdor K518 JLR AKL Cable?

 An extra JLR AKL harness is required when you are going to program 2015-2021 Jaguar Land rover HPLA JPLA K8D2 version all smart keys lost with active alarm using Lonsdor K518ISE.

 

Hers is the Lonsdor official all keys lost programming instruction including how to connect the JLR AKL harness with the vehicle and Lonsdor K518 device.

Part I: 2015-2018 Jaguar Land rover All keys lost

Part II: 2018-2021 Jaguar Land rover All keys lost

 

Part I: 2015-2018 Jaguar Land rover All keys lost with Lonsdor K518

Remote generates automatically after key programming finished.

Use Lonsdor 2015-2018 JLR key + AKL license

Menu path:
LAND ROVER\Select from vehicle\Land Rover(2015-2018)\Smart key\Type 4(via OBD)- All smart key lost

Function:

1. All smart key lost: re-program keys when all registered smart keys are lost.
2. Identify smart key: identify and check if current key is Lonsdor dedicated key for Jaguar LandRover.

 

Operation

Tips: PIN not required;

Support programming key by OBD

Write smart key(via OBD)

1. This function can program key by OBD(no need to dismantle car module), support Key Add and All Key Lost operations, please note:(1) Key Add operation will not delete the programmed keys, at least one unlocked working key is required during the procedure;(2) All Key Lost operation will delete the programmed keys, the unlocked working keys can be re-programmed on current vehicle. For the locked working key, please make sure the key can be unlocked before programming, otherwise it will be deleted;

   (3) New key(to be programmed) only supports Lonsdor dedicated key for Jaguar LandRover.

2. Communicating...
3. Do you have working key for this car? If yes, click OK to execute Key Add operation; if no, click Cancel to execute AKL operation.
4. Must select a position with key ID to generate working key:Key postion: [01]   ID：2B14CE37   sync code: 00148B6DKey postion: [02]   ID：11BDD036   sync code: 0020E374

   Key postion: [03]   ID：00000000   sync code: 00000000

   Key postion: [04]   ID：00000000   sync code: 00000000

   Key postion: [05]   ID：00000000   sync code: 00000000

5. Please put the key(to be generated) into K518 card slot.
6. Select current key type:(1) Lonsdor dedicated key for Jaguar LandRover(2) Unlocked dealer key(from car manufacturer) or aftermarket key, programmed on current vehicle already
7. Reading and writing data to key...please keep the key placed stably in the slot.
8. Communicating...
9. Generation successful, click OK to program more keys.
10. Program completed.

Identify smart key

1. Please put the smart key(to be identified) into K518 card slot.
2. Reading and writing data to key...please keep the key placed stably in the slot.
3. Key ID: 11BDD036, it's Lonsdor dedicated key for Jaguar LandRover.
4. Please put the smart key(to be identified) into K518 card slot.
5. Reading and writing data to key...please keep the key placed stably in the slot.
6. Key ID: 2B14CE37, it's not Lonsdor dedicated key for Jaguar LandRover.
7. Please put the smart key(to be identified) into K518 card slot.

Attention

1. This function support key programming. Just directly connect the device to car OBD port to program. Dismantle FREE.
2. You can select Key Add or All Key Lost operations, Key Add will not delete the programmed keys, All Key Lost will delete the programmed working keys, the unlocked working keys can be re-programmed on current vehicle. For the locked working key, please make sure the key can be unlocked before programming, otherwise it will be deleted.
3. Must select the position with key ID to generate working key. It's actually replacing working key, not adding new key, so you can only select the position with key ID.
4. When the device prompts "The selected key position doesn't have key ID or valid data, you cannot generate working key here!", please change to the position with key ID.
5. When program the deleted key on AKL condition, if it prompts "Identified that the selected key position ID doesn't match current key ID, cannot generate working key successfully, please change the position and retry", indicate the key position is incorrect. Before program, you can identify the deleted key ID first and then select position with the same ID, or try to change to other postions until generation successful.
6. Must use Lonsdor dedicated key for Jaguar LandRover(JLR), or unlocked dealer key from car manufacturer or aftermarket key(programmed on current vehicle already), otherwise it will prompt "Failed to read and write data to key. Please check if the key or key chip is correct".
7. Lonsdor dedicated key has two frequency: 315 and 433MHz, select the corresponding Lonsdor dedicated key according to working key's frequency, the dedicated key will not be locked and is reusable.
8. The key generated by using Lonsdor dedicated key, share all the functions of working key. If the working key is added by dismantling KVM, there is no Emergency Start function, then the generated Lonsdor key will not has this function accordingly.
9. On AKL condition for JLR, car will under alarm status:(1) Part no.FK72: generate working key directly via OBD;(2) Part no.HPLA: connect JLR cable to generate working key. (3) Part no. JPLA: connect JLR cable to generate working key.
   (4) Part no. K8D2: connect JLR cable to generate working key.

10. Connection way of JLR AKL cable is shown below:

(1) Find CAN wire under driver seat

(2) Find the wire in below pics:

(3) Connection way is shown below, there is a twisted pair (CAN wire) under driver seat, one is yellow-red CANH, the other is yellow-purple CANL, connect the red hook (pin) to CANH, and connect the black hook (pin) to CANL. If the twisted pair is different in color, try to connnect the two hooks to different wires respectively, if communication fails, then change the connection order.

(4) JLR cable connection:

• Connect Lonsdor K518 with OBD cable
• Connect OBD cable to one end of the JLR AKL harness
• Connect JLR AKL harness the other end to vehicle OBD port
• Connect Black and red hooks (pins) to CAN wire under driver seat (images above)

(5) CAN wire is different in position for some vehicle models, cannot directly connect JLR cable under driver seat. Require to find KVM in trunk first, use L-JCD 2 in 1 cable to connect CAN wire. If using JLR cable, require to connect an extension cabble, then use two clamps to connect CAN. Shown in below pic:

Part II: 2018-2021 Jaguar Land rover All Keys Lost with Lonsdor K518

use Lonsdor 2018-2021 JLR key with shell and AKL license. 

K518ISE menu instruction can be found in the previous post here

JLR 2018-2021 OBD Key Programming Tips with Lonsdor K518ISE

Menu path:

LAND ROVER\Select from vehicle\Land Rover(2018-)\Smart key

 

 

Function: 

1. Copy and add smart key: copy and add key in the position of working key, and generate new key in the position of lost key.
2. All smart key lost: reprogram keys when all registered keys are lost.
3. Identify smart key: identify smart key ID.
4. Modify vehicle config: make it possible for low equipped keys to be programmed on high config vehicles.
5. Replace RFA: replace vehicle RFA module.
6. Write RFA initial data: if the replaced RFA chip has no intial data written, you can use this function to write data to the RFA.

Operation

Key Programming Procedure

High config vehicles with PSPS:

1. Add key when working key is available, vehicle is not in alarm state:JPLA ver: Replace RFA—> Modify vehicle config—> Copy and add smart key.K8D2 ver: Replace RFA—> Modify vehicle config—> Copy and add smart key, or modify vehicle config—> copy and add smart key—> Replace RFA.
2. On AKL condition, vehicle is in alarm state:Connect JLR cable well(refer to 'Attention'), then enter [All smart key lost] function menu, use Lonsdor JLR key to generate an emergency key, after generation press the remote's unlock button to disarm vehicle alarm state. After disarming the state, unplug the JLR cable. No need to connect JLR cable while replacing RFA and modifying vehicle config.JPLA ver: Replace RFA—> Modify vehicle config—> Copy and add smart key.K8D2 ver: Replace RFA—> Modify vehicle config—> Copy and add smart key, or modify vehicle config—> copy and add smart key—> Replace RFA.

Low config vehicles without PEPS:

1. Add key when working key is available, vehicle is not in alarm state:Enter [Copy and add smart key] function menu, use Lonsdor JLR key to add new key.
2. On AKL condition, vehicle is in alarm state:Connect JLR cable well(refer to 'Attention'), then enter [All smart key lost] function menu, use Lonsdor JLR key to add new key.

Copy and add smart key

1. This function can copy and add key in the position of working key, and generate new key in the position of lost key, please note:(1) For low config models without PEPS, the generated key function is complete, can be used directly. For high config models with PEPS, the key has RKE and Emergency Start functions ONLY (no PKE) after copy finished;(2) RKE function of the copied key will conflict with the working key in the same key position;(3) New key to be generated must be Lonsdor dedicated JLR(2018+) key.
2. Communicating...
3. Software ver: K8D2-14C104-AC;
4. Pls prepare all working keys, and in turn to place each key into this device's card slot to idenitify. Pls note: if a working key is not identified in the slot, after new key generation completed, RKE function of the unidentified working key will become invalid;
5. Pls place the working key to be identified into this device's card slot;
6. Reading and writing key...pls keep the key placed stably;
7. Identified key info: key ID: 59B6F4E7 , remote sync code: 1FFB4E00;
8. Pls select the position with key ID to copy and generate working key;
9. Pls place the key to be generated into this device's card slot;
10. Reading and writing key...pls keep the key placed stably;
11. Key generation success, if current vehicle is in alarm state, pls press the remote's unlock button to disarm the state;
12. Program completed.

All smart key lost

1. This function is for AKL condition, please note the following points, use it with caution:(1) It will delete all working keys and doesn't support the lost keys to be re-programmed to the vehicle;(2) New keys must be Lonsdor dedicated JLR(2018+) key;(3) For low config models, it supports AKL programming (generate key directly). For high config models, require to use car manufacturer's diagnosis device to execute [Replace RFA] process first, and then modify car config (namely, disable UWB function), before using this function to do AKL;

   (4) High config models use this function directly when no config data modified, and the generated key has RKE and Emergency Start functions ONLY (has no PKE).

2. Communicating...
3. Software ver: K8D2-14C104-AC;
4. Pls select the position with key ID to copy and generate working key;
5. Pls place the key to be generated into this device's card slot;
6. Reading and writing key...pls keep the key placed stably;
7. Key generation success, if current vehicle is in alarm state, pls press the remote's unlock button to disarm the state;
8. Program completed.

Identify smart key

1. Pls place the smart key to be identified into this device's card slot;
2. Reading and writing key...pls keep the key placed stably;
3. Key ID: 59B6F4E7.

Modify vehicle config

1. This function is designated for JLR(2018+) high config models, by using it to disable UWB PEPS function, support for low equipped keys to be programmed to the high config models.(1) Backup vehicle config data: back up config data of current vehicle;(2) Modify vehicle config data: disable UWB PEPS function;(3) Restore vehicle config data: restore the config data backed up before to current vehicle.
2. Back up vehicle config data;
3. Communicating...
4. Pls enter the filename;
5. Backup success;
6. Modify vehicle config data;
7. Communicating...
8. Reading data...
9. Disable/turn off UWB PEPS function;
10. Configuring system...
11. Completed.

Replace RFA

1. This function is the programming process of replacing RFA module for JLR(2018+) models, pls note the following:(1) If current vehicle RFA is locked, [Replace RFA] process cannot be executed;(2) Confirm that current vehicle has installed brand new RFA module, or that the main chip of current RFA has been replaced with a brand new chip SPC560B60L3 and initial data has been written;(3) Vehicle battery voltage should be kept above 12V, otherwise exception may occur during programming, highly suggest that you plug external 12V DC to power up vehicle battery.

   (4) Pls prepare at least two keys which can be programmed to current vehicle.

   (5) In vehicle alarm state, pls disarm the alarm first before function execution.

2. Communicating...
3. Read info:Part no.: JPLA-14C430-ABSoftware ver: JPLA-14C104-AEVIN code: SALGA2BV4JA******
4. The program will turn ignition on automatically, pls confirm the ignition is turned off;
5. The following process is to execute RFA data programming function, if current RFA has been executed once a complete data programming, can skip over this process. Click OK to execute RFA data programming; click Cancel to enter key programming process directly.
6. Loading...
7. Erasing data storage block...
8. RFA data programming completed, to program key multiple times, can skip over this process, and directly enter key programming function.
9. Configuring system...
10. The program will turn ignition on automatically, pls confirm the ignition is turned off;
11. Learning VIN...
12. Writing immo ID...
13. Pls prepare at least 2 keys to be programmed, and place the key inside the vehicle, need to press the unlock button during programming, click OK and follow the prompts, start to program key;
14. Pls hold the smart key to be programmed in hand;
15. Press hard and hold the unlock button for 4s, the buzzer beeps twice to indicate current key programming success;
16. Program completed.

Write RFA initialized data

1. Pls select RFA module No.:
2. (1) JPLA-XXXXXX-XX
3. (2) K8D2-XXXXXX-XX
4. (3) J9C3-XXXXXX-XX
5. Writing DFLASH data...
6. Writing CFLASH data...
7. Success.

Attention

1. For low config vehicles without PEPS, the generated key function is complete, can be used directly. For high config vehicles with PEPS, the copied key has RKE and Emergency Start functions ONLY (has no PKE).
2. RKE function of the copied key will conflict with the working key in the same key position.
3. When copying and adding key, in turn to put all working keys into the device's card slot. After key generation is complete, RKE function of unidentified working key will become invalid.Must select the position with key ID to generate new working key.
4. After key generation is complete, if current vehicle is in alarm state, pls press the remote's unlock button to disarm the state.
5. [All smart key lost] function will delete all working keys, and doesn't support the lost key to be re-programmed to the vehicle. High config models use this function directly when no config data modified, then the generated key only has RKE and Emergency Start functions (has no PKE).
6. For low config models, it supports AKL programming (generate key directly). For high config models, require to disable UWB function first, and then use car manufacturer's diagnosis device to execute [Replace ECU] process, before using this function to do AKL.
7. Before replacing RFA, require to prepare at least 2 keys which can be programmed to current vehicle.When replacing RFA, plug external 12V DC to power up the vehicle battery.
8. Vehicle will be under alarm state on AKL condition, you can use JLR cable to connect the device to the vehicle to realize communication. Connection way of JLR cable is shown below: (1) Part no. JPLA: connect JLR cable to generate working key.
   (2) Part no. K8D2: connect JLR cable to generate working key.

(1) Find CAN wire under driver seat

(2) Find the wire in below pics:

(3) Connection way is shown below, there is a twisted pair (CAN wire) under driver seat, one is yellow-red CANH, the other is yellow-purple CANL, connect the red hook (pin) to CANH, and connect the black hook (pin) to CANL. If the twisted pair is different in color, try to connnect the two hooks to different wires respectively, if communication fails, then change the connection order.

9. JLR cable connection:

10. If the replaced RFA chip has no intial data written, in [Write RFA initial data] function menu you can use KPROG adaptor to write data to the RFA.

RFA pcb:

Chip wiring diagram:

11. CAN wire is different in position for some vehicle models, cannot directly connect JLR cable under driver seat. Require to find KVM in car trunk first, use L-JCD 2 in 1 cable to connect CAN wire. If using JLR cable, require to add a extension cord, then use two clamps to connect CAN. Shown in below pic:

http://blog.obdii365.com/2022/02/09/connect-lonsdor-jlr-akl-harness-for-2015-2021-all-keys-lost/

2018-2021 JLR Key Programming Tips with Lonsdor K518:

 New Lonsdor K518ISE/K518S update for JLR Jaguar Land rover. Now 2018+ is supported by OBD2.  This function requires the use of Lonsdor special key and open JLR license.

Features of Lonsdor 2018-2021 JLR key:

• ID allows being modified
• RKE function
• Smart remote
• Emergency Start
• PKE function
• Reusable

Compatible devices:

• JLR OEM dealer tool
• Lonsdor K518ISE/K518S
• Other aftermarket JLR key programmers

If you have JLR AKL software license activated (same license as 15-18 JLR) in your K518 device, just need to get this dedicated key.

 

Menu path:

IMMO/Jaguar or Land rover/ Select from vehicle/ Land rover (2018-)/ Smart key

You can check operation help document as well.

2018-2021 JLR key programming tips with Lonsdor K518:

High config vehicles with PEPS

–Add key when working key is available, vehicle is not in alarm state

JPLA ver Replace RFA->Modify vehicle config-> copy and add smart key
K8D2 ver Replace RFA->Modify vehicle config-> copy and add smart key or Modify vehicle config -> copy and add smart key- > Replace RFA

–On All keys lost situation, vehicle is in alarm state
Connect JLR cable, then select ‘All smart key lost’ function menu, use Lonsdor JLR key to generate an emergency key, after generation press the remote UNLOCK button to disable active alarm,. Then unplug JLR cable. No need to connect JLR cable while replacing RFA and modify vehicle config.

 

Low config vehicles without PEPS:

–Add key when working key is available, vehicle is not in alarm state
Enter ‘Copy and add smart key’ function menu, use Lonsdor JLR key to add new key

–On All keys lost situation, vehicle is in alarm state
Connect JLR cable, then select ‘All smart key lost’ function menu, use Lonsdor JLR key to add new key.

Copy and add smart key
1. This function can copy and add key in the position of working key and generate new key in the position of lost key
1) Follow config models without PEPS, the generated key function is complete, can be used directly.
For high config models with PEPS, the key has RKE and Emergency Start functions ONLY (no PKE) after duplication finished.

2) RKE function of the copied key will conflict with the working key in the same key position
3) New key to be generated must be Lonsdor dedicated JLR (2018+) key
2. Communicating
3. Software version K8D2
4. Prepare all working keys and turn to place each key into the device card slot to identify.
5. Place the working key to be identified into the card slot
6. Reading and writing key
7. Identify key info key ID, remote sync code
8. Select the key position with key ID to copy and generated working key
9. Place the key to be generated into the card slot
10. Reading and writing key
11. Key generation success. If current vehicle is in alarm state, press the UNLOCK button to disable active alarm
12. Program completed.

All smart key lost
1. This function is for AKL condition, use it with caution.
1). It will delete all working keys and does not support the lost keys to be re-programmed to the vehicle
2) New keys must be Lonsdor dedicated JLR (2018+) key
3) For low config models, it supports AKL programming (generate key directly)
2. Communicating
3. Software version K8D2
4. Select the position with key ID to copy and generate working key
5. Place the key to be generated into K518 card slot
6. Reading and writing key
7. Key generation success. If current vehicle is in alarm state, press the UNLOCK button to disable active alarm
8. Program completed.

FAQ JLR 2018-2021 Key:

Q: Any Specific Emulator?

A: Need Lonsdor dedicated key and JLR license.

 

Q: Work with Active Alarm?

A: Yes.

 

Q: Does it work passive start as well or just emergency start?

A: Works with both passive start and emergency start

 

Q:Can lonsdor make key for 2021 land rover Jpla?

A: Yes, but not all, better provide VIN to confirm.

 

Q: Can be reused?

A: Yes, can be rewritten to use.

 

Q:  Is land rover key compatible with 2020 HSE Model sports edition?

A:  Yes, it is.

 

Q:  Does it program obd2 or does it require eeprom and wiring?

A:  Majority can be done via obd2, some required eeprom job if equips with smart box PEPS.

Lonsdor K518ISE Program Range Rover 2010 Key

 Question:

Range rover 2010 customer has the key like the photo. Will I be able to program the key with the nickel like the second picture I have using Lonsdor K518ISE? My key is pcf7953.

Same key, same system, only the housing different. Same key different shapes.

Yes, do it via OBD in 10 minutes. There is no problem until 2014.

The kvm being fk72 after 2014 which is locked.

 

 

For 2015-2018, you will need Lonsdor dedicated JLR smart key and JLR license.

 

Check:

http://www.lonsdor.org/lonsdor-518ise-program-2018-range-rover-evoque-kvm-all-keys-lost/

http://www.lonsdor.org/can-lonsdor-k518ise-program-range-rover-2010-key/

Does Lonsdor JLR Smart Key Support HPLA All Keys Lost?

 Question:

I have a question about the Lonsdor JLR Smart Key. Is it possible only with FK72 to lose all keys? Is this available for all software versions of FK72, HPLA?

 

 

Answer:

Lonsdor new JLR license and the dedicated smart key is available for all software version of FK72, HPLA.

For FK72, supports both Add key and all keys lost to JLR 2015-2018 with the key via OBD directly.

For HPLA, supports add key via OBD directly. All Keys lost requires an extra JLR Connector (coming soon)

https://www.obdii365.com/service/program-2018-range-rover-all-keys-lost-with-lonsdor-k518ise.html

Lonsdor 518 Program 2018 Evoque All Keys Lost via OBD

 2018 Range Rover Evoque is very difficult to program when lost all smart keys.  Here we program it in a crazy easy what via OBD only.  No EEPROM, No KVM out, no break the system.

 

Tools required:

Lonsdor K518ISE or K518S key programmer

Lonsdor new JLR software license 

Lonsdor dedicated JLR proximity key 

How-to: Program 2018 Evoque KVM system using OBD key

First, connect K518 obd cable to the vehicle
Located just below the driver side dash

First, select Immo and remote-> Land Rover ->Select from vehicle->Land Rover 2015-2018->Smart key->Select type 4 (program by obd)->All smart key lost and wait to connect

Choose all keys lost will delete the original key from system be sure before selecting

Update works for both FK72 and HPLA versions of KVM system

All keys lost, select cancel and confirm

Select desired key position and generate a working key

Place JLR OBD key to be generated into k518ise card slot, select ok to begin

Confirm use of Lonsdor dedicated key

Reading and witting key

Generated successfully. Confirm once the process complete, begin key testing by unlocking the vehicle
Everything works.
Key works straight.
The procedure is done in a few minutes very easy, program a brand new smart key no problem.

 

https://www.obdii365.com/service/program-2018-range-rover-all-keys-lost-with-lonsdor-k518ise.html