Lonsdor K518ISE Program Volvo C30 2011 Semi-intelligent Key

Guide to program Volvo C30 2011 year semi-intelligent key  with Lonsdor K518ISE key programmer.

Key information:

Original key: 5 buttons semi-smart key

Frequency: 433MHz

Chip type: 48 chip

Key ID and security code: Required

Device to read CEM data: Xhorse VVDI Prog programmer

Device to program key: Lonsdor K518ISE key programmer

Procedure:

Step 1: Read CEM data

Disassemble the CEM module behind the car glove box

Open CEM module and find CPU chip

K518 will show you wiring connection to read CPU EEPROM and FLASH data by VVDI prog programmer

Save eeprom and flash data

Send eeprom and flash data to Lonsdor technician service@lonsdor.com, they will generate and send you the license file.

Connect K518ISE host with laptop via USB cable. Copy the license file to K518 “customfile” folder.

Step 2: Program Key

Connect Lonsdor K518 host with vehicle via obd diagnostic socket

Select Volvo->C30->Program Smart Key->Add a key

Call lonsdor engineer or contact via email above to get the license file

Select license bin file to be uploaded

Insert new key to be programmed into card slot

Turn ignition to ON position

Check the remote ID and security code which stamped on the remote key box

select 24-digit security code

Follow K518 prompt to enter 8-digit remote key ID and confim

Then enter 24-digit remote security code and confirm

Program volvo C30 remote key success.

Test the remote key.

Done!

http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.skp1000.org/lonsdor-k518ise-program-volvo-c30-2011-semi-smart-key/