The task is to program smart keys for Nissan Qashqai 2017 with ID47 Hitag 3 (AES) chip. The key programming procedure are performed by the Lonsdor K518ISE key programmer.
2-button smart key
Procedure:
Connect K518 host with vehicle via OBD socket
Turn ignition on
Select Immobilizer->Nissan->Select from vehicle->New X-tail->2017-> With Smart->Program Smart Key
Close all car doors and press Start button
Turn off ignition and turn on emergency flasher
Open and close driver door once
Next step will delete all smart keys. You can program up to 4 smart keys with Lonsdor K518
Press the Start button, put smart key to be programmed close to the Start button within 5 sec.
The instrument turns on and the security indicator will flash 5 times
The instrument turns on and the security indicator will flash 5 times
Then turn off ignition, wait for 5 sec
Program success. Press OK to program next key, press Cancel to exit
Press the Start button, put the smart key programmed above close to the Start button,
if you hear the buzzer rings continuously which indicates that programming is comppleted
if you hear the buzzer rings continuously which indicates that programming is comppleted
Lonsdor will program the remote control automatically
Test the new smart key
Working!!!
No comments:
Post a Comment