Lonsdor K518 Program Mitsubishi ASX 2015 PCF7936 Remote Key

Here’s the instruction on duplicating a new key for Mitsubishi ASX 2015 with chip PCF7936. Chip programming and remote control programming were carried out with the device Lonsdor K518ISE key programmer.

2-button remote key with chip PCF7936

Procedure 

Step 1: Generate key chip

Connect K518 host with vehicle via OBD socket

Select Special Function->Generate key chip->46 chip->Mitsubishi

Insert key/chip into Lonsdor K518 card slot

Generating in progress

Generate key chip success

Step 2: Program chip key

Turn on ignition

Select Immobilizer->Mitsubishi->Select from vehicle->Europe->ASX->Without Smart-> Program smart key

Lonsdor K518ISE will ask pin code to access

1. For Lancer, Lancer-ex, try PIN:8A02, 8A12,8A32,8A42,8A62
2. For Outlander/Ralliart, try PIN:8A12, 8A32, 8A42
3. For ASX, try PIN: 8A62

Here we enter 4-digit pin code 8A62 and confirm

Programming…

Program completed. Press OK to program next key

Insert next key within 10 seconds and turn on ignition

Both programmed key can start engine.

Step 3: Program remote control 

Select Immobilizer->Mitsubishi->Select from type->Remote->Type 1->Program remote

This function will delete all programmed remotes

Lonsdor K518 will ask to enter pin code again

Press LOCK and UNLOCK button, release after the remote control light flashes 3 times.
Wait for 1 sec, then press the unlock button once, to program more remotes please repeat the above procedure.

Program remote control completed.

Test the remotes, both working.

http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.lonsdor.org/lonsdor-k518ise-program-mitsubishi-asx-2015-remote-key/