Lonsdor K518ISE Read Buick Lacrosse 2011 Pin Code by OBD

New test feedback: Lonsdor K518ISE key programmer read security pin code on Buick Lacrosse 2011 success.

Very fast.

Connect K518 host with vehicle via OBD socket

Select Buick->Read PIN Code->Type 6

http://www.obdii365.com/wholesale/lonsdor-k518ise-key-programmer.html

Lonsdor K518ISE Program Chevrolet Cruze 2016 All Keys Lost

How to: read Chevrolet Cruze year 2016 security pin code and program remote keys when all keys lost using Lonsdor K518ISE key programmer.

Step 1: Read Pin Code

Connect K518 Host with vehicle via OBD diagnostic socket

Select Immobilizer->Chevrolet -> Read Pin Code->Read Pin Code Type 1

Turn on ignition switch

Communicating…

Lonsdor K518ISE read pin code success.

Step 2: Program Remote Key

Go back to Chevrolet menu

Select Cruze-> Immobilizer-> All Keys Lost

Close all doors and turn on ignition

Lonsdor K518 will require enter 4-digit pin code to access and confirm

Configuring system, wait for 10 minutes.

Turn ignition off. Remove key

Switch on and off the driver door, make sure all the electrical appliances are off.

Click OK to continue.

Insert key to be programmed and turn on ignition switch

Program success. Press YES to program next key.

Follow steps above to program next key or more keys.

Turn ignition off. Remove key.

Program complete.

Start car and test the remote.

Working!!!

http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.lonsdor.org/lonsdor-k518ise-program-chevrolet-cruze-2016-all-keys-lost/

Lonsdor K518ISE Program Jeep Grand Cherokee 2015 Smart Key

Lonsdor K518ISE Jeep Grand Cherokee 2015 Smart Key programming including pin code reading guide goes below:

5-button Panic smart key

Step 1: Read Pin Code

Connect K518 host with vehicle via OBD socket

Turn ignition to ON position

Select Immobilizer->Jeep->Grand Cherokee-> 2014 up->Read Pin Code-> Read IMMO data (OBD)

Turn ignition off and turn on emergency indicator

Configuring system

Read immo data and then save data

Immo data backup success.

Select Load immo data & read Pin code

Lonsdor K518 read Grand Cherokee pin code through immo data success

Step 2: Program smart key

Select Grand Cherokee->Type 2 (CAN)-> Add smart key

Turn ignition off and then turn on emergency indicator

Enter 4-digit pin code just read to access

Attach the smart key to be programmed close to the Start button and press Unlock button within 30 sec

Follow same procedure to add another smart key with Lonsdor K518ISE.

Test thew new smart keys. Working ok.

www.obdii365.com

http://www.lonsdor.org/lonsdor-k518ise-add-jeep-grand-cherokee-2015-smart-key/

Lonsdor K518ISE Program Renault Megane 2008 Smart Card

Lonsdor K518ISE key programmer new feedback: program smart key card Renault Megane 2008 via OBD without pin code successfully.

Procedure and photo attached:

Connect K518 host with vehicle via OBD socket

Select Immobilizer->Renault->Select from vehicle->2002-2008 VIN with VF1*M-> Smart Key

Turn on emergency indicator and then turn it off

Press on the Start button

Open driver door

Select Renault Vin/chassis Number

Insert the smart key card to be programmed

Lonsdor K518 program Renault Megane 2008 Key Card complete.

Test the new key.

www.obdii365.com

http://www.lonsdor.org/lonsdor-k518ise-program-renault-megane-2008-key-card/

Lonsdor K518ISE KPROG-2 Adapter Kernel Update Guide

The tutorial: How to update KPROG-2 adapter kernel

After the APK of Lonsdor K518ISE device is updated to version 1.6.0 , the adaptor requires to be installed new kernel beforehand. Please refer to the following tutorial.

What’s a KPROG-2 adapter?

Source: http://www.obdii365.com/wholesale/kprog-adapter-for-lonsdor-k518ise-key-programmer.html

It’s an adapter used with Lonsdor K518ise for backup or replacement.

How to update KPROG-2 adapter kernel?

Step 1: Connect the device to the specified adaptor and plug in 12V power, as shown

below.

Step 2 : Start up the device, and input password to enter home screen. Click “Update

firmware” button in below red box.

Step 3: The following interface appears, click “Install Adaptor” in below red box.

Step 4: It skips to the below interface, click “OK” to continue.

Step 5: It skips to below interface. You will see the progress indicator moving

rightwards. When downloading is completed, click OK” and exit. The adaptor kernel

is installed successfully.

Job’s done!

Tech support from http://www.obdii365.com/

http://blog.obdii365.com/2018/05/31/lonsdor-k518ise-kprog-2-adapter-kernel-update-tutorial/