How to Program Hyundai Kia 8A Proximity with Lonsdor K518ISE?

 Lonsdor released Hyundai and Kia 8A smart key programming using PS6000B and PA7800B smart keys.

 

Here is the Hyundai Kia 8A smart keys supported vehicle list and shell.
Software and Frequency are convertible.

 

Supports P4 versions:

0000A3A3 / 000000D3 / 0000D3D3

0000B3B3 / 00002323 / 0000CECE

0000D0D0 / 0000D2D2 / 0000CDCD

 

Supported Models:

Chinese Hyundai/Kia

Sonata 9/15-17
Sonata 9 Hybrid/15-17
Beijing Hyundai 1X25/17-19
Kia K3/16-18
Beijing Hyundai IX25/-16 front
Beijing Hyundai 1X35/18+
Elantra leads 16-19

 

Global Hyundai/Kia

HYUNDAI Sonata 2015-2017
HYUNDAI Sonata Hybrid 2015-2017
HYUNDAI IX35 2018+
HYUNDAI Elantra 2016-2019
KIA K3 2016-2018

How to Program Hyundai Kia 8A Smart Key with Lonsdor K518?

Go to Special Functions-> Key Settings-> XD smart keys-> Smart key conversion

Convert PS6000B or PA7800B smart key to your original key version

Then go to the immobilizer menu, select corresponding models and program 8A smart key.

Program 2007 Maserati Quattroporte Key with Lonsdor K518

How-to: programming a 2007 Maserati Quattroporte via obd using londsor k518ise/k518s/k518usa key programmer. Went smooth pulled all data needed total time was 10 min job. Autel couldn’t do it. Londsor did it in 10 mins.

Steps are as follows. back up immo data first then make dealer key. Program key then program remote.

Generate dealer key successfully

Program key

Detect vehicle info.

Input PIN to continue

Program 1st key

Then program 2nd new key

 

Last step is to program remote with Lonsdor K518

Done.

How to Fix Lonsdor K518ISE Brick BMW CAS3++ ISTAP

 Here comes the problem:

I am using Lonsdor K518ISE to add a new key to a 2008 BMW CAS3++ ISTAP. Had battery stabilizer on 13.7 entire time and good internet.
Original key and new key not starting car.
New key buttons are working.
Error on dash car in hoist service error.
I’ve attached photos of the process.

Steps taken:
CAS 3
Update cas successfully
Add key
Made dealer key followed prompts
Not proxy so added remote key.
Used card slot to generate.
Everything seemed successful but car won’t start but buttons do work.
I’ve tried to synch ELV and DME.
No change
I did restore on cas
No change
Battery reset
No change.
Cleared fault codes

Solution:

cas3++ istap downgrade via OBD is very risky, better do it always on the bench.

Whenever you make a copy or all key lost, of these CAS3 or CAS3+ modules, the ideal is to do it on the bench, read the original file, no error. doing it by obd2 can corrupt CAS file.

You can use vvdi prog+vvdi2 or cgdi bmw on bench. Autel IM608 is way easier, faster and more guaranteed. the londsor is hit or miss on BMW.

http://blog.obdii365.com/2021/08/19/repair-bmw-cas3-istap-with-autel-im508-im608/

CAS and engine ECU lost ISN. You have to read ECU and CAS file to sync ISN.
You need good eprom and flash files to recover the cas then you need to to program key with Isn from DME
Then sync the cas with DME on the car.

Feedback:

Started again with Autel added a new key again and everything worked. Just connected the Autel downgraded again and added key once I cleared the ELV the error went and everything worked. Autel for the Win!

http://www.lonsdor.org/lonsdor-k518ise-bmw-cas3-istap-car-not-start/

Lonsdor K518 series new update for Lancia

 Lonsdor K518 series (K518ISE, K518S etc) released new immobilizer software update for Lancia models.

Super Update:

Lancia
Flavia
Thema
Thesis
Voyager
Ypsilon
Zeta

Can Lonsdor K518ISE Program Toyota 2022 Smart Key?

 Will Lonsdor K518ISE program Toyota 2022 smart keys, i.e Land cruiser 2022 add key and all keys lost? If yes, what key to use?  original key, aftermarket key or must be Lonsdor key?

 

Here’s the clue:

Check the P04 page of the smart key, if P4 ends with BABA or 3939, Lonsdor cannot do all keys lost, only add key.

If P04 page is not BABA or 3939, Londsor will do both add key and all keys lost.

All keys lost requires ADP adapter and LKE emulator.  Generate LKE emulator and add key. You can use either OEM, aftermarket or Lonsdor keys as well as key board is correct.

 

Example:

Program 2018-2022 Toyota Camry 8A All Keys Lost by Lonsdor ADP Adapter

Program Toyota RAV4 2021 All Keys Lost with Lonsdor K518 & ADP Adapter

Lonsdor K518ISE Adds Toyota Corolla 2021 4A Key with ADP Adapter

Lonsdor Adds Sienna Harrier CH-R Yaris RAV4 Models in July 2022

Lonsdor K518ISE adds Sienna Harrier CH-R Yaris etc smart Key Programming in July 2022.

Requires ADP adapter and Londsor 8A smart key

Updated models:

SIENNA HV

Wildlander HV

Vios FS/2017-
C-HR EV

Wildlander PHV

Crown Kluger HV
Harrier HV

Yaris L Zhixiang/2017

Izoa EV
Levin PHV

Yaris L Zhixiang/2018

lzoa/2018-2021
Levin/2019-

Yaris L Zhixiang/2019

Corolla PHV
Rav4 HV

Yaris LZhixuan/2009

Corolla HV/2019-2021
Rav4 PHV

Yaris L Zhixuan/2011-

Land Cruiser/2014-2021
Wildlander

Yaris L Zhixuan/2019 (Compatible Vehicles)

Lonsdor P0120 vs H0440B vs PH0440B Smart Key

 What’s the difference between Lonsdor P series, H series and PH series Toyota/Lexus 8A H smart keys?

 

P series smart key:

i.e P0120, P0020 etc

P series smart keys are used to generate remote with Lonsdor KH100+ or K518 programmer, then program to vehicle

H Series smart key 

i.e FT-08 H0440C, FT11 H0410C

H series smart keys are used to collect 8A H chip key data from the vehicle

It is out of date and update to the PH series.

PH series smart key:

i.e FT08 PH0440B, FT02 PH0440B

FT08 PH0440B is the upgrade version of H0440C

FT02 PH0440B is the upgrade version of H0410C

The PH series smart key can be used to collect data, generate remote and copy Lexus/Toyota remote

PH smart key features:

• Allow frequency change
• Customize buttons
• Compatible with multi-OBD programmers
• Reusable
• Support key copy with KH100/K518ISE series
• Simulate 8A emergency key
• Support all keys lost via data collection

In a nutshell,

P smart keys are used to generate remote ONLY.

H smart keys are used to collect data only.

PH smart keys can be used to collect data, generate remote and copy remote.

Lonsdor K518ISE Failed to Add Key Passat 2009 Solution

 uestion: How to do immo with the remote control for vw passat b6 2009 white counter?. I tried immo4 NEC 24c64 on Lonsdor K518ISE key programmer but it doesn’t work. I can’t program remote, shows a general error

Solution:

Passat doesn’t have immo in the meter
no B6/B7/CC. Immo is in comfort.
Need to remove ccm and read eeprom. Generate dealer key then program to vehicle. Program remote separate unless have working key easier to clone key and program remote

Lonsdor K518ISE Kprog2 Pinout

 Question: I am trying to read JLR all key lost 2018+ with Lonsdor K518ISE, this kprog2 adapter pinouts looks different from machine instructions, if there is any additional plus or cables need to purchase

see label don’t match the pinouts.

Solution:

Follow the wiring diagram in the instructions to connect. Don’t care about the text on kprog2 adapter.

then connect Dupont line to KPROG2, the other end to FS-01 board.

http://www.lonsdor.org/lonsdor-k518-kprog2-power-wire-connection-pinout/

Lonsdor P0120 8A Smart Keys for Toyota MVP Cars

 Lonsdor Tech released a new P0120 8A smart key for Toyota Alphard, Vellfire, and Alpha MVP vehicles.

 

Compatible device: Lonsdor K518ISE, Lonsdor K518S

Function:
Add key
All keys lost
Delete key

Frequency
314.35/315.10
312.50/314.00
433.58/434.42

Board numbers:
0120A5 0120A6 0120B5 0120B6 0120C5 0120C6

 

P0120 8A Smart Key PCB 5-Button

P0120 8A Smart Key PCB 6-Button

5 Buttons Key Shell for P0120 PCB

6 Buttons Key Shell for P0120 PCB

Lonsdor 2019 Range Rover Keyless Entry Not Working Solution

 After a generate 2019 Range Rover key with Lonsdor K518ISE and JLR smart key, write the key lock unlock works.

But you have to be close to the steering to start which is keyless entry won’t work
And this car has no issues all good he just lost the key.

Solution:

This model UWB ((Ultra Wide Band)) function is enabled. All current Land Rover models employ ‘Ultra Wideband’ (UWB) technology within the vehicle’s Smart Keys. This is normal if keylessgo not working.

Go to Lonsdor Modify vehicle config function.

Disable UWB function.

Then check if the key is working properly.

Lonsdor K518ISE Modify vehicle config Function info.

1. This function is designated for JLR (2018+) high config models, by using it to disable UWB PEPS function, supports low equipped keys to be programmed to the high config models.(1) Backup vehicle config data: back up config data of current vehicle;(2) Modify vehicle config data: disable UWB PEPS function;(3) Restore vehicle config data: restore the config data backed up before to current vehicle.
2. Back up vehicle config data;
3. Communicating…
4. Pls enter the filename;
5. Backup success;
6. Modify vehicle config data;
7. Communicating…
8. Reading data…
9. Disable/turn off UWB PEPS function;
10. Configuring system.
11. Completed.

http://blog.obdii365.com/2021/05/30/lonsdor-518ise-program-2018-range-rover-evoque-all-keys-lost-via-obd/

Lonsdor K518ISE Adds Renault Traffic 3 2015 Key

 Renault Traffic 3 2015 program 2nd key with Lonsdor K518ISE successfully. 10 min job.

Read flash, prepare dealer key and learn key.

Done a lot of these, 30-40. No issues. But always with battery support.

2015 10 min. 2018 onwards up to 40 min.

Smart Pro does these in 5mins. Lost key too. Autel can add key no problem, nice no Lonsdor does them. Tools so powerful now.

Lonsdor ADP Adapter Cannot Be Used on This Device?

 Problem:

I need help with the Lonsdor ADP adapter. It cannot work after I change another K518ISE key programmer.

Error 

The current Toyota Adapter is bound to another device host. cannot be used on this device.

Solution:

Each ADP adapter is registered/bound with one K518 machine only.

ADP is not allowed to unbind a K518 then bind with another device.

If ADP is broken, needs to send back for repair.

If lost your ADP adapter, need to purchase a new replacement.