Here are the solutions to some common problems of Lonsdor KH100 remote maker.
Problem 1:Cannot connect to network even if there are several hotspots available.
Problem 2: Stuck in some interface for a long time while operating.
For example, when you register the device, it just keeps searching for network. When you turn on the device, it keeps loading for several minutes.
For example, when you register the device, it just keeps searching for network. When you turn on the device, it keeps loading for several minutes.
Problem 3: lonsdor kh100 turned on the device and there is an UPDATE SCM 99% screen and it does not respond.
Solution to problem 1, 2 & 3:
Download the repaired file of KH100 and put the file on the desktop of a computer. Unzip the file and you will get two files.
Turn off the device. Hold “Down” button for a few seconds and then press “Power” button once, the device will enter “USB Disk Mode” interface.
Connect the device to the computer and put those two files into the kh100.
Click “OK” to reboot the device and you will see a progress bar in the device. The device will be updated automatically.
Check whether the lonsdor kh100 works or not after updating.