Lonsdor K518ISE - English version of K518 is the advanced auto key programmer with wider vehicle coverage. (NO TOKENS- FREE UPDATES- NO FEES)
The blog focus on K518 manual, guides, video, update information.
I have a 2017 Toyota Prius that has lost all its keys and I turned on this car with the device (Lonsdor KH100+) and the LKE simulator, but no matter how hard i try, i cannot add a remote for this car.
Kh100 gave error "Toyota online service No H0440C/H0410C key detected, adjust the position and retry"
Solution:
The LKE emulator can not be used with KH100 remote maker. It is for K518ISE/K518S key programmer only.
The K0440C is for latest (2018 2019 2020) Toyota Lexus all smart keys lost via OBD, cannot be used on 2017 year model.
If the Toyota model has 93C86 immo type, it can be done by K518 and LKE emulator.
*Emergency start smart entry/start remote control All keys lost by OBD
Add Key on FK72 HPLA version: confirmed
All Keys lost on FK72 version: confirmed
*Please provide the machine serial number to activate, no need shipping.
JLR license is permanent, won’t be expired.
Operation guide:
How to use Lonsdor K518 to program 2017 Jaguar XFL AKL in alarm state version. FK72?
Open the car door, the buzzer keeps beeping, car is in alarm state.
Prepare Lonsdor JLR Smart Key 315MHz/ 433MHz (mentioned above) and the unlocked key previously programmed on current car, confirm they don’t work before testing.
Select IMMO & Remote->Land rover ->Select by vehicle-> Land rover 2015-2018->Program Smart Key->Type 4 (OBD all keys lost)->All smart key lost
Key position [01] generate key – select Lonsdor specific key for Jaguar Land Rover.
Put the specific key (to be programmed) into K518 card slot.
Tick off “Lonsdor dedicated Jaguar /Land Rover key” and tap “Yes” to go on.
Keep the key placed stably, until the 1st key is generated successfully.
After generating the 1st key, press the remote’s unlock button to disarm car alarm state.
Key position [02] generate key – select the unlocked key previously programmed on current car.
Put the specific key (to be programmed) into K518 card slot.
Tick off ” The current vehicle has been matched with the unlocked original factory or the aftermarket key ” and tap “Yes” to go on.
Failed to generate, because the key was not placed properly, please adjust the key position, retry to generate working key.
The 2nd key is generated successfully.
Lonsdor K518 Program 2017 Jaguar XFL AKL successfully, please back to the home menu.
Next is to test if the two keys’ remote / smart start function work fine.
I try to make Toyota 8A smart key AKL with Lonsdor K518ISE and LKE emulator, the device said it has bound to k518. but it failed me and LKE is not generating key from eeprom file.
Toyota Crown (A8 H chip) All smart Key Lost and program new key byLonsdor K518S plus key emulator (LKE)via OBD. The whole process is as simple as a piece of cake.
Here we go for details:
Search the model Toyota ->select by type -> All smart key lost -> all key lost
Backup EEPROM data.
1). This function can back up car EEPROM data.
2). When backup complete, go to [Make emulator key] to make an emergency emulator key.
3). Use the key to touch the start button to ignite dashboard and add key.
Name the file.
Backup eeprom data complete. Please go to [Make emulator key] to make a spare original key.
Generate LKE.
This function can generate an alternate master key when all the key are lost. This key can replace the original working key to turn on the dashboard to add key.
The key emulator (LKE) is already bound to the device, whether to choose the required EEPROM backup file to generate LKE? Click [OK] to continue [Cancel] to exit.
Please select the file that is saved in step 3.
Generating.
Current EEPROM info:
Count of keys: 1 Key type: A8.
Once the key is generated, put the spare key close to the ignition, turn on the dashboard, and select [Add key] function to program the new key.
Put the emulator key or workable original key close to the ignition switch, and turn it ON till the dashboard is lit up.
Put the back side of the registered key close to the start button, when buzzer rings once, remove the key.
Operation complete.
Count of the registered keys: 2
Count of the register keys (to be registered): 5
Test whether the key can start the car.
Okay, it works.
Job is done.
Don’t you think it is easy with Lonsdor K518S by following the on-screen instructions. And please keep in mind that, you will need one extra key emulator (LKE).
See also:
Program Toyota Prius 2011 all keys lost with Lonsdor and LKE emulator
D flash Read with vvdi prog save to Lonsdor custom files and programmed through obd
First make dealer key and then program.
I also made a porsche Macan 2015. I read with vvdi prog, I programmed the dealer key with xhorse vvdi2 and with this same equipment I programmed it by obd2 in the car.
