Procedure:
Step 1: Backup Immo Data
Connect K518ISE host with vehicle via diagnostic socket
Select Immobilzation->Ferrari->458->Immobilizer->
Select Backup Immo Data function
Turn ignition ON
Communicating
K518ISE will show hardware and software information
Turn ignition OFF
Reading immo data, wait for 6 minutes
Lonsdor K518ISE will read Ferrari 458 pin code and key security data after 6 minutes
write down the pin code
save immo data as bin format
Backup success
Step 2: Program Key
Select Program Key function
The original working key also need to program.
New key to program must be a customized or a pre-written key
Turn ignition ON
Lonsdor K518 then will require to enter PIN code to access
Enter 5-digit pin code and confirm
Number of keys programmed: 1
Press YES to program next key or press NO to go back
Program key complete
Step 3: Program Remote
Select Program Remote function
Turn ignition ON
Again enter PIN code here
Hold remote key to be programmed in hand
Click OK
Click on remote control for 3 sec within 15 sec
press any button on remote key for 3 sec
Number of remote control programmed: 1
Press YES to program next remote
Program remote complete.
http://www.obdii365.com/wholesale/lonsdor-k518ise-key-programmer.html
No comments:
Post a Comment