Lonsdor k518ISE key programmer has successfully programmed a remote smart key on a Honda Insight year 2010 immobilizer 2.
Easy procedure goes below:
Connect K518 host with vehicle via OBD diagnostic socket
Turn on K518ISE
Select Honda->Select by type->Immobilizer->->16 pin->Immo 2->Add a key
Insert registered key and switch ignition on
Turn ignition off within 15 sec
Turn ignition switch on
Turn ignition off within 17 sec
Switch ignition on with a new key within 20 sec
Turn ignition off within 17 sec
Turn ignition on without replacing key within 20 sec
Turn ignition off in 15 sec
Turn ignition on
Check if the immobilizer indicator goes off
Press YES to continue
Turn ignition off within 15 sec
Turn ignition on
Lonsdor k518ISE identified keys programmed: 4
Programming completed.
Test the remote and start car.
Success.
No comments:
Post a Comment