How to Update Kernel of Lonsdor K518ISE Key Programmer

Here’s the tutorial on adding Hibernation function on Lonsdor K518ISE tablet key programmer .

Updated Device: Lonsdor K518ISE

Updated Condition: for all K518 devices with working normally

Updated Content: Added Hibernation function; Kernel update supported

Update Benefit: Save power to prolong stand-by time. Auto standby function can prevent the device from being overheated in hot summer.

Updated Version: K518 APK V1.5.25

Preparation for Update:

1. Power on the device or keep the battery level over 80%.
2. Make sure wifi network is in good condition and the device receives signal normally;

Update steps:

1. Click [One key update] and skip to below K518ISE  interface. Then click the first button to update system. When the update complete, click [OK] to reboot the device.

2. After rebooting, click and enter [Settings] menu, you will find there are two additional function buttons: [Update Kernel ] and [Display Settings].

3. Click [Update Kernel] first and skip to below interface, then press [Update] to update the kernel.

4. Click [Install] after updating the kernel file. And the device will reboot to install kernel.

5. Blank screen is normal during the installation. The whole process will take 5 minutes, be patient to wait and don’t restart the device manually.

6. The update complete when the password input interface appears. Screen auto-lock in the [Display Settings ] is added.

7. Enter [Settings]→[Display Settings] to adjust the screen brightness and screen auto-locking time .

Save power to prolong stand-by time. Auto standby function can prevent the Lonsdor K518 from being overheated in hot summer.

Lonsdor-K518ISE-HEX-editor-Instruction.docx

Lonsdor-K518ISE-update-Hibernation-Function-obdii365.doc

http://www.lonsdor.org/add-lonsdor-k518ise-hibernation-function-and-update-kernel/