2014 Chevrolet Impala keyless entry remote programming by Keydiy NC series remote using Lonsdot K518ISE key programmer.
including pin code reading.
Step 1: Generate remote using Keydiy KD-X2
Put original key into KD-X2 remote maker, identify chip: 46 chip
Remote Programming->Chevrolet->select remote 2011-2014 Cruze 433MHz multifunction
Click on Generate Remote
Generate remote success
Step 2: Read Pin code with Lonsdor K518ISE
Connect K518 host with vehicle via OBD socket
Select Chevrolet->Read Pin Code->Read pin code type5
Turn on ignition switch
Identify VIN
Read pin code success
Step 3: Program key with Lonsdor K518
Select Chevrolet->enter from Cruze->Immobilizer->All keys lost
Close all doors and switch ignition on
Enter 4-digit pin code to access
Configuring system, wait about 10 minutes
Follow K518ISE prompts step by step and wait patiently
The progress is just like the Cruze
The progress is just like the Cruze
Succeed.
Test the remote.
Done.
No comments:
Post a Comment