Lonsdor K518ISE Program Citroen Berlingo 2013 Remote Key

How-to guide: Citroen Berlingo 2013 key programming by Keydiy remote using Lonsdor K518ISE key programmer via OBD.

Berlingo 2013 original remote 3-button

Keydiy universal remote 3-button

Step 1: Read Pin Code 

Connect K518 host with vehicle via OBD socket

Select Immobilizer->Citroen-> Read pin code->Type 2

Turn ignition switch to ON position with original key

Read vehicle information: VIN, PSA number etc

Reading data and verifying PIN

Londsdor K518 read Berlingo 2013 pin code succeed

Step 2: Program key & remote 

Select Immobilizer->Citroen->Select from vehicle ->Berlingo->Immobilizer->Type 3->Program key

Turn ignition to ON position

Communicating

Read vehicle information again

K518ISE requires 4-digit pin code to access

Turn ignition OFF and ON with original key within 15 seconds

1st key programming completed

Turn ignition off.

Insert new key (keydiy remote), turn ignition on

2nd key programming completed

Follow steps below to program remote control:

1. Turn ignition off and remove key
2. Insert a key and switch ignition on
3. Press any button of the remote key for 10 sec and then release within 20 sec
4. Switch ignition off and remove key

Program remote key success.

Test the remote and start vehicle.

Done.

www.obdii365.com