Lonsdor K518 cannot read Grand Cherokee 2014 PIN code Solution

Used to read pin codes for 2014 Jeep Grand Cherokee using Londor K518ise.

But now i cannot read the pin.

this is the version able to read pin from Grand Cherokee

but now it cannot…

forced to update sw

nothing changed

the machine device info (id, sn)

i check alk immo0

nothing as smart 453

immo4 immo5 all

go to the trial apply in the main interface

Trial apply it’s only 90 days

so, now, everything is clear.

In Londor K518, menus are divided into two parts:

free menus and subscribed menus.

1. Free menus are free for lifetime.
2. Subscribed menus can be used for free for 90 days.

You need to pay for them after the trial period. After the trial period, subscribed menus will not work properly if you don’t pay. And the menus will disappear after updating the device.
A. 365 days is a period and the price is USD600 per period. One year period starts from the day of the trial period finished.
B. Purchase menus with a dealer. You can use the menus normally and permanently after payment.
C. Menus which you purchase includes subscribed menus that have been released and that will have been released in one year period.
D. Subscribed menus beyond one year period requires extra payment.

after 90 days’ trial period, click check for updates in one key update, you can use subscribed menus for an extra 90-day period.

 http://www.lonsdor.org/lonsdor-k518ise-can-read-pin-code-from-jeep-grand-cherokee-2014/

Lonsdor K518ISE Program BMW F01 2010 CAS4 Remote Key

Model: BMW 7-series F01 2010

IMMO Type: CAS4 1L15Y

Remote frequency: 868MHz

Tools used: 1 original key and a new key, remote unlocker, xhorse vvdi prog and Lonsdor k518ISE key programmer

Step 1: Renew Remote Key

unlock/renew BMW remote key PCF7953 using vvdi key tool or other remote unlocker

Step 2: Read CAS4 Dump with VVDI Prog

Follow VVDI-Prog wiring diagram to connect cas4 and computer

Read and save CAS4 1L15Y dump data

Step 3: Add key with Lonsdor K518

Select Immobilizer->BMW->Select from type->CAS4/CAS4+ ->Make ignition key

Copy and paste CAS4 D-flash/EEPROM to Lonsdor “customfile” folder

Select D-flash data

Read VIN

Select a key position to add

Put the key to be generated to K518 card slot

Generate ignition key success.

Follow steps below to program remote control:

Program remote key success.

Reinstall CAS4 module

Close the new key to ignition and press Start button to sync key

Test remote control and start engine.

Done.

http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.lonsdor.org/lonsdor-k518ise-adds-bmw-7-series-f01-2010-cas4-remote-key/

Program Peugeot Bipper 2011 All Keys Lost with Lonsdor K518

Another success for Lonsdor K518ISE key programmer!
Peugeot Bipper 2011 EU version All Key Lost. Read Pin code and program key success. Under 1 minute work.

Procedure:
1) its basicaly Fiat Fiorino. its considering like fiat because they have Magneti marelli BSI.  Its the same car only different badge. Same as Ducato/Boxer/Jumper and so on.
2) read PIN (even through Lonsdor wants working key)
3) make a dealer key (again even Lonsdor wants working key)
4) program key as All Key lost

Picture attached:

http://www.lonsdor.org/lonsdor-k518ise-program-peugeot-bipper-2011-all-keys-lost/

Program Honda CR-V 2015 Remote Key with Lonsdor K518

How to make a chip key with auto start on the Honda CR-V 2015. In the key chip ID49 Hitag 3 (Hitag pro). The remote control buttons are automatically programmed. Key rogramming is done with the Lonsdor K518ise key programmer.

Remote key 3 buttons

Note: DO Follow each IGN ON/OFF operation.

Connect K518 host with vehicle via OBD Socket

Select Immobilizer->Honda->Select from vehicle->CR-V->2012 up-> Immobilizer->Search Immo Type->Immo Type

Turn on ignition switch

Lonsdor K518 identified the immo type 2

Then go back to select IMMO2 and Add Key

Insert registered key and switch ignition ON

Turn off ignition in 15s

Turn ignition on with original key in 17s

Turn off ignition in 17s

Turn on ignition with a new key in 20s

Turn off ignition in 17s

Turn on ignition switch without replacing key in 20s

Turn off ignition in 15s

Turn on ignition

Check if the immobilizer indicator goes off

If yes, turn off ignition in 15s

Switch ignition on

The new key has been successfully programmed

Test all keys.

Done.

http://www.obdii365.com/producttags/lonsdor-k518ise.html

Program 2016 Ford Mondeo Remote Key with Lonsdor K518ISE

Here’s the procedure to duplicate a key for the 2016 Ford Mondeo with key chip ID49 Hitag 3 (Hitag pro). The remote control is automatically programmed. Key programming is done with the Lonsdor K518ISE key programmer.

Two keys are required. Original key and a new key (3-button remote).

Turn on ignition switch with original key

Select Immobilizer->Ford->New Mondeo-> pre-2017->Immobilizer->Add key

You can check Lonsdor K518 manual to add key or program all keys lost

Switch ignition off

Read VIN and key numbers

Insert a new key and turn on ignition

Programming in procedure

Identify number of programmed keys: 3

Program complete.

Test the remote control and start car.

Done.

http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.lonsdor.org/lonsdor-k518ise-program-ford-mondeo-2016-remote-key/