How to make a chip key with auto start on the Honda CR-V 2015. In the key chip ID49 Hitag 3 (Hitag pro). The remote control buttons are automatically programmed. Key rogramming is done with the Lonsdor K518ise key programmer.
Remote key 3 buttons
Note: DO Follow each IGN ON/OFF operation.
Connect K518 host with vehicle via OBD Socket
Select Immobilizer->Honda->Select from vehicle->CR-V->2012 up-> Immobilizer->Search Immo Type->Immo Type
Turn on ignition switch
Lonsdor K518 identified the immo type 2
Then go back to select IMMO2 and Add Key
Insert registered key and switch ignition ON
Turn off ignition in 15s
Turn ignition on with original key in 17s
Turn off ignition in 17s
Turn on ignition with a new key in 20s
Turn off ignition in 17s
Turn on ignition switch without replacing key in 20s
Turn off ignition in 15s
Turn on ignition
Check if the immobilizer indicator goes off
If yes, turn off ignition in 15s
Switch ignition on
The new key has been successfully programmed
Test all keys.
Done.
No comments:
Post a Comment