Sunday, April 7, 2019

Lonsdor K518ISE Program Toyota Corolla 2012 72G Remote Key

The task is to make 2 new master keys after lost all keys on a 2012 Toyota Corolla car with key chip 72G. Immobilizer reset, key programming and remote control programming is done with Lonsdor K518ISE car key programmer.

Main steps:



Step 1: Generate 72G key chip
Step 2: Reset IMMO
Step 3: Program 1st master key
Step 4: Add another master key
Step 5: Program remote control

Step-by-step procedure:


Step 1: Generate 72G key chip
lonsdor-k518ise-2012-toyota-corolla-1

lonsdor-k518ise-2012-toyota-corolla-2

lonsdor-k518ise-2012-toyota-corolla-3

lonsdor-k518ise-2012-toyota-corolla-4

In Lonsdor K518ISE, select Generate key chip->4D->Toyota 72G
lonsdor-k518ise-2012-toyota-corolla-5

Place a blank chip into K518 card slot, press OK
lonsdor-k518ise-2012-toyota-corolla-6
Select a master key position
Generating
lonsdor-k518ise-2012-toyota-corolla-7
Generate 72G key chip succeed.

Step 2: Reset IMMO
Select Immobilizer->Toyota-> Select from vehicle->China->Corolla->2012 up-> Mechanical key (with 72 G)->Reset Immobilizer (all key lost)
lonsdor-k518ise-2012-toyota-corolla-8

lonsdor-k518ise-2012-toyota-corolla-9

lonsdor-k518ise-2012-toyota-corolla-10

lonsdor-k518ise-2012-toyota-corolla-11
lonsdor-k518ise-2012-toyota-corolla-12
Turn off ignition switch
Switch ignition ON
Getting immo data
lonsdor-k518ise-2012-toyota-corolla-13
Switch ignition off and remove key
Turn on ignition again
lonsdor-k518ise-2012-toyota-corolla-14
Programming key in progress
lonsdor-k518ise-2012-toyota-corolla-15
Switch ignition off and remove key

Step 3: Program 1st master key
Follow steps below to program key within 120s (here we need to program 1 master key)
lonsdor-k518ise-2012-toyota-corolla-16
lonsdor-k518ise-2012-toyota-corolla-17
Program 1 master key:
Insert the first master key, switch ignition on and wait 5 sec, and then switch ignition off 5 times. When immo indicator goes off, programming completed.
lonsdor-k518ise-2012-toyota-corolla-18
1st master key programming completed
lonsdor-k518ise-2012-toyota-corolla-19
The key can start car.


Step 4: Add another master key
lonsdor-k518ise-2012-toyota-corolla-20
Select Add key function
lonsdor-k518ise-2012-toyota-corolla-21
A master key is required before remove or add other keys.
lonsdor-k518ise-2012-toyota-corolla-22
Insert the programmed original key into ignition
lonsdor-k518ise-2012-toyota-corolla-23
Insert the key to be programmed. Don’t turn on the ignition switch.
lonsdor-k518ise-2012-toyota-corolla-24
Wait for the security light go off. Programming completed.

Step 5: Program remote control 
In Lonsdor K518, go to Immobilizer->Toyota->Select from vehicle->China->Corolla->2012 up->Remote->Program remote
lonsdor-k518ise-2012-toyota-corolla-25
lonsdor-k518ise-2012-toyota-corolla-26
Turn on ignition switch
lonsdor-k518ise-2012-toyota-corolla-27
Open the driver door. When the internal locks is open, open other doors.
Reading data
lonsdor-k518ise-2012-toyota-corolla-28
Press and hold the lock and unlock buttons of the remote to be programmed for 2 sec simultaneously within 30 sec, press the lock button once, click OK to continue
lonsdor-k518ise-2012-toyota-corolla-29
Remote programming succeed.
http://www.lonsdor.org/program-toyota-corolla-2012-72g-remote-key-with-lonsdor-k518ise/

No comments:

Post a Comment