Lonsdor K518ISE Program VW Passat MQB Keyless Virtual Cocpit

How to add a new new MQB keyless smart key to a VW Passat with Virtual Cockpit digital instrument cluster using Lonsdor K518ISE and VAG OBD Helper.

Need a original key and a new key

Main steps:

Step 1: Read IMMO data with VAG OBD Helper

Step 2: Program dealer key with Lonsdor k518

Step 1: Read IMMO data

(token is required)

Connect OBD helper cable with vehicle

In VAG OBD Helper software, select Read car information

Detect vehicle information, VIN, IMMO type, Key ID etc
Read MQB NEC35X immo data success and auto saved to default folder

The Immo data can be used to generate key with K518 key programmer
Copy and paste the NEC35XX immo data to K518ISE “customfile” folder

Unplug OBD helper cable and connect K518 with vehicle

Step 2: Make Dealer Key

1) Identify IMMO Type

In Lonsdor K518ISE, select Immobilizer->IMMO4->Auto identity IMMO
Identify IMMO type MQB BEC325XX/VDO IMMO4

2) Generate Dealer Key

Select Select IMMO manually->MQB- 35XX (Continental /VDO)->Immobilizer->Make Dealer Key

Select IMMO data from K518 customfile folder (read from Step 1)

Confirm IMMO, CS and PIN

Select Generate Dealer Key->VW->Add key

Please insert the original key into the k518 key slot

Detect original key

Place a new key into K518 card slot

Generate dealer key in process

Make dealer key completed.

3) Program Key via OBD

Choose Program key (OBD)

Choose IMMO data from K518 customfile again

Confirm CS and PIN

Turn the ignition on with the original car key. For the smart key, turn the ignition on and off, open and close the car door, and then click OK.

The key to add must be the dealer’s key, if not, please go to “Create a dealer key” to generate it, enter quantity and prepare all keys

Lonsdor K518 will require to enter number of keys to be programmed: 2

Select the if the key is smart key, press OK

Place the original key to near the vehicle’s induction coil and continue working after lighting the dashboard

Place key 1 near the induction coil and keep the other keys away

Programming, don’t remove the smart key

Place key 2 near the induction coil and keep the other keys away

Programming 2nd key completed

Add key finished

Test both keys and remote control

Done.

www.obdii365.com

http://www.lonsdor.org/program-vw-passat-mqb-keyless-virtual-cockpit-with-lonsdor-k518ise/