Read PIN code and programmed a smart key on a Dodge Journey 2018 with Lonsdor K518ISE key programmer without problem.
Did not use Lonsdor L-JCD Cable, but the Smart Pro 2018 bypass cable instead.
Read Pin Code
Select Immobilizer->Dodge->Select from vehicle-> North American->Journey->2011-2019->Smart Key->Read PIN Code
Start reading pin code
Read 4-digit security code success
Program Smart Key
Select Add smart key
Switch ignition off and turn on warning light
Switch ignition off and turn on warning light
Make sure there are no other devices near the smart key(s).
Lonsdor K518 will manually fill in pin code to access
Close the key to be programmed to Start button and press Unlock button once within 30 sec
Program 1st smart key complete
Current key number: 1
Test remote control and smart vehicle with the new key.
Done.
No comments:
Post a Comment