Problem:
Lonsdor K518ISE key programmer couldn't enter the main interface, stuck in "50% loading" (as shown in the two pictures below). Obdii365.com here offers a solution and the problem has been solved well.
Kindly be noted that it's applied to all the following situations:
Situation 1: It cannot enter the main interface of the device.
Situation 2: It takes a long time to enter the main interface.
Situation 3: Some menus are lost in the device.
Solution:
Step 1: Hold these two buttons marked in red at the same time, and you'll enter an interface as below.
Step 2: Press Uninstall APK once, and you'll go to another interface like this image.
Step 3: Press OK and you'll be back to the previous screen.
Step 4: Press Oldest APK once, then enter the password accordingly.
Step 5: Connect the device to WiFi and press Update.
Step 6: Press OK to force update the Lonsdor.
Now the Lonsdor K518 will work normally as before.
http://www.lonsdor.org/solved-lonsdor-k518ise-entering-problem-or-menus-missing/
Lonsdor K518ISE - English version of K518 is the advanced auto key programmer with wider vehicle coverage. (NO TOKENS- FREE UPDATES- NO FEES) The blog focus on K518 manual, guides, video, update information.
Subscribe to:
Post Comments (Atom)
-
The task is to make a duplicate key for a 2013 4th generation Immobilizer Volkswagen Tiguan with key chip ID48. The chip key and remote pro...
-
This is for those looking for a decent universal OBD key programmer that can work good for Toyota smart keys. For key programming, Obd...
-
Here's the guide on programming BMW CAS3 remote key by using Lonsdor K518ISE key programmer . Connect K518 host with vehicle via OBD soc...
No comments:
Post a Comment