Lonsdor K518ISE Program 2020 Toyota C-HR All Keys Lost

 How-to: program Toyota C-HR 2020 8A smart key all keys lost with Lonsdor K518ISE and Lonsdor FT02-PH0440B smart key.

 

Device used:

Lonsdor K518ISE key programmer

Lonsdor FT02 PH0440B smart key

Lonsdor Toyota AKL license

 

Procedure:

Connect K518 with vehicle via OBD

Go to Special Function->Key Settings->FT Smart Key->8A->Generate smart key

The function requires network connection
Put PH0440B smart key into K518 card slot
key requires battery installed

Select PKE frequency:433MHz

(This is EU model, should select 434MHz frequency but failed to collect data. 433mhz just works fine)

Take all keys outside vehicle, press Start button, hold H0440B smart key closer to the button, wait for 10s until the key’s light flashes, if the light doesn;t flash, press Start button once again.

Reading vehicle data

then put the PH0440B smart key which collected data back to K518 card slot to start key generation

confirm you don’t have a working key

Generate smart key successfully.

Test the new key. It is working. Done.

http://www.lonsdor.org/lonsdor-k518-generate-toyota-c-hr-2020-all-keys-lost/

How to Add Toyota RAV4 2017 Smart Key with Lonsdor K518

 As titled, possible to add Toyota RAV4 Hybrid 2017 smart key with Lonsdor K518ISE?

Yes, there are 2 ways to do it.

 

With ADP adapter, backup immo data and add smart key.
Menu path: Immo & Remote->Toyota->Select type->All smart keys lost (2016-)->8A

Connect ADP adapter, go to menu path: Immo & Remote->Toyota->Select type->All smart keys lost (2016-)->8A

First backup immo data

Then Add smart key.

Then use FT PH0440B smart key, go to Special function->Key settings->FT smart key->8A to generate smart key (need network connection and obtain data from server)

Lonsdor K518 P0020B Failed to Obtain Key Data Solution

 Problem: I had a problem with Lonsdor K518ISE and P0020B smart key pcb. It failed to obtain key data. Seems it is not a collectable type. Any solution?

 

Solution:

P0020B smart key pcb can only be used to transfer but no collect key data.

To collect key data you need H0440C, H0410C or PH0440B smart keys.

Lonsdor K518 Program Toyota Camry 2019 All Keys Lost

 TOYOTA CAMRY 2019 – ALL Smart key lost programming with Lonsdor K518.

What’s required:

Lonsdor K518ISE
ADP adapter
LKE emulator

 

Connect ADP adapter with vehicle immo box and K518 device follow the wiring diagram

Immo & Remote->Toyota-> Select from type-> All smart keys lost (2016-)->8A

Step 1: Backup immo data
Select Backup immo data
Save Immo data

Step 2: Generate LKE
Select Generate LKE function
The function requires network connection
Put LKE emulator into K518 induction coil
Upload immo data read in step 1
Generate LKE emulator successfully

Step 3: Add smart key
Select Add smart key
Put emulator key into the induction coil
Put new key into k518
Program new key successfully.

http://www.key-programmer.org/2022/12/01/lonsdor-k518ise-program-toyota-camry-2019-all-keys-lost/