Program Ford Escort 2017 All Keys Lost with Lonsdor K518

Lonsdor K518 auto key programmer has successfully programmed smart keys on a Ford Escort year 2017 under all keys lost situation.

Key information:
Original key: 3-button folding key
Remote frequency: 433MHz
Chip type: 49 chip
Device to program: Lonsdor K518 key programmer
Requirement: At least 2 keys are required to be programmed

Procedure:
Connect K518 host with vehicle via OBD socket
Turn ignition switch to ON position
Select Ford->Escort->Program Key->All keys lost

Turn iginition off

At least 2 keys are required to be programmed

Insert first key and turn on ignition

Turn ignition off and remove key

Insert second key and turn on ignition

Lonsdor K518ISE identified number of keys programmed: 2

Program success

Disconnect Lonsdor k518 programmer.
Test the new keys.


http://www.skp1000.org/lonsdor-k518-program-ford-escort-2017-all-keys-lost/

How to Bind SKE-LT Smart Key Emulators to Lonsdor K518ISE

To program Toyota smart system all keys lost with Lonsdor K518ISE key programmer, you need to bind SKE-LT series emulators to K518 host. Check guide below:

Insert battery 2032 to emulator keys. All 4 emulator keys should be registered with Lonsdor K518.

Procedure:
Turn on K518
Select Toyota-> All smart keys lost-> Bind emulation key

This function can bind SKE-LT series emulator keys to Lonsdor K518 host.
Such operation is required when using the SKE-LT series emulator keys.

Place the emulator key into K518 key slot

Press the button on the emulator, green indicator tuns on

Register emulator keys with Lonsdor K518 success. Now you can program all keys lost with the emulator key.

Example:

Program Lexus ES200 Smart Key All Keys Lost with Lonsdor K518ISE by OBD

If you had "Write key failed" error when program Toyota all keys lost, make sure you have bound the emulators with K518.

http://www.skp1000.org/register-ske-lt-smart-key-emulators-to-lonsdor-k518ise/

How to Program BMW X6 CAS3++ Remote Key with Lonsdor K518

Guide to add remote key to a BMW X6 CAS3++ immobilizer system by using Lonsdor K518 key programmer.

Procedure:
Step 1: Update CAS3++
Connect K518 host with vehicle via OBD socket
Select BMW->By System-> CAS2/CAS3-> Program key

Ready to generate dealer key:

1. The operation can add a key to vehicle (select unused key position)
2.  The operation can replace original key (select used key position)
3. Can generate key with K518 by OBD or slot

Press YES
Insert key that will start vehicle
Turn ignition ON
Lonsdor K518 will display CAS information
It shows the CAS type is not supported, follow guides to update CAS++ (ISTAP).

select CAS3 Update

Ready to update CAS3

1. The operation will update CAS++
2. Please backup original EEPROM data before operation

Insert key that will start vehicle
Turn ignition ON
Read CAS part number and type. Then read key information, tooth code, remote frequency, ignition key position etc

Read to update CAS. The procedure takes about 10 minutes

Do not carry on if battery voltage is lower than 11.5V
Make sure vehicle has enough power supply andn battery voltage is higher than 11.5V.
Don't disconnect battery nor insert key into ignition during the procedure.
If it is smart key, take away from vehicle

Remove key from ignition
Take smart key away from vehicle

Restarting CAS...

Erasing FLASH data

Downloading and verifying data until it completed

Step 2: Program Key
Select Program Key function on Lonsdor K518ISE menu

Insert a working key and turn on ignition
K518 read updated CAS information
Encrypted CAS, please backup EEPROM data before operation

Read key information again
Reading RAM, takes about 1 minute

Remove key from ignition
Take smart key away from vehicle
serurity check
reading key information
Select a unused key position (Key Position 3 or 4) and generate by OBD

Insert the key to be programmed into K518 host slot to identify if the key is brand new

Select key type: Remote Key

Insert the key to be programmed into ignition
Put smart key into card slot
Well connect Lonsdor K518 key programmer with vehicle
Writing key information

To program smart key or remote key, you need complete follow steps:

1. Remove key from ignition
2. Insert key
3. Press on Start button

If cannot start vehicle, or dashboard displays ELV icon , you may need to synchronize DME or ELV accordingly
Write key success

Test the new remote key.
http://www.obdii365.com/producttags/lonsdor-k518ise.html


http://www.skp1000.org/lonsdor-k518-program-bmw-x6-cas3-remote-key/

Lonsdor K518 Program Peugeot 307 2011 Remote Key

Guide to read pin code and program remote key on a Peugeot 307 year 2011 by using Lonsdor K518 auto key programmer.

Key information:
Original key: 2-button folding remote key
Frequency: 433MHz
Chip type: Electronic 46 chip
Device to program: Lonsdor K518 key programmer

Procedure:
Step 1: Read Pin Code
Connect K518 host with vehicle via OBD socket
Turn ignition to ON position
Select car band Peugeot-> Read Pin Code-> Type 1

During the procedure, car wipers brush and headlights turn on. It is normal.
Read pin code success.

Step 2: Program key
Select Peugeot 307-> 2006 up->Program key

Lonsdor K518ISE will require to enter 4-digit pin code to access

Enter pin code and confirm

Complete following steps within 15 sec:
Turn ignition off, turn ignition on and press YES to continue

Program success. Press YES to program next key or NO to go back

Programming completed

Step 3: Program remote

Follow steps below to program remote control:

1. Turn ignition off and remove key
2. Insert a key and turn ignition on
3. Press on any button of the remote key for 5 seconds and then release within 20 seconds
4. Turn ignition off and remove key
5. If have more remote to program, repeat Step 2 to Step 4.

Done! Test the new remote key.
http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.skp1000.org/lonsdor-k518-program-peugeot-307-2011-folding-key/