Lonsdor K518 Program Peugeot 307 2011 Remote Key

Guide to read pin code and program remote key on a Peugeot 307 year 2011 by using Lonsdor K518 auto key programmer.

Key information:
Original key: 2-button folding remote key
Frequency: 433MHz
Chip type: Electronic 46 chip
Device to program: Lonsdor K518 key programmer

Procedure:
Step 1: Read Pin Code
Connect K518 host with vehicle via OBD socket
Turn ignition to ON position
Select car band Peugeot-> Read Pin Code-> Type 1

During the procedure, car wipers brush and headlights turn on. It is normal.
Read pin code success.

Step 2: Program key
Select Peugeot 307-> 2006 up->Program key

Lonsdor K518ISE will require to enter 4-digit pin code to access

Enter pin code and confirm

Complete following steps within 15 sec:
Turn ignition off, turn ignition on and press YES to continue

Program success. Press YES to program next key or NO to go back

Programming completed

Step 3: Program remote

Follow steps below to program remote control:

1. Turn ignition off and remove key
2. Insert a key and turn ignition on
3. Press on any button of the remote key for 5 seconds and then release within 20 seconds
4. Turn ignition off and remove key
5. If have more remote to program, repeat Step 2 to Step 4.

Done! Test the new remote key.
http://www.obdii365.com/producttags/lonsdor-k518ise.html

http://www.skp1000.org/lonsdor-k518-program-peugeot-307-2011-folding-key/